Product Detail
The Dracast DR90S2CK is an amazing bundle featuring a multi - voltage V - Mount dual charger and two 14.8V lithium - ion batteries with 5 LED status displays. This dual charger is highly efficient, capable of charging a single battery or both batteries at the same time. Key features include a lithium - ion battery type, simultaneous charging of 2 batteries, an Inhabit IC protection system, and a 5 LED battery status gauge. The DR - CH2V dual V - Mount battery charger has a power input of 90 to 240 VAC, 47 to 63 Hz, and a power output of 4 - pin XLR, 15 VDC, 4 A. It consumes 50 W of power, has dimensions of 4.6 x 8.9 x 5.5” (11.7 x 22.6 x 14 cm), and weighs 2.2 lb (1 kg). The 90Wh 14.8V Li - Ion V - Mount battery has a V - Mount type, a lithium - ion chemistry, a capacity of 90 Wh, an output voltage of 14.8 VDC, and an accessory port of 1 x D - Tap. It can operate at temperatures between - 4 to 122F / - 20 to 50C, has dimensions of 6.7 x 3.9 x 1.9” / 170.0 x 100.0 x 47.0 mm, and weighs 1.8 lb / 0.8 kg.
Using the Dracast DR90S2CK is a breeze. First, make sure the power input to the dual charger is within the range of 90 to 240 VAC, 47 to 63 Hz. You can place one or two of the 90Wh V - Mount lithium - ion batteries on the charger for charging. The 5 LED status displays on the batteries will show you the charging status. When charging, ensure the charger and batteries are in a well - ventilated area and away from flammable materials. For maintenance, keep the batteries and charger clean. Avoid exposing them to extreme temperatures. If you don't use the batteries for a long time, store them at around 50% charge level. Also, don't overcharge the batteries. The Inhabit IC protection system is there to help prevent over - charging, but it's still good to be cautious.